I set out to build a small room divider that would go between the living room and dining room and it kind of grew in to a large piece that now resides up against the wall.
Finished product. I added the rocks and three lights behind the bamboo for added flair.
The bamboo lay out. I made many adjustments till I found the right pattern.
First coat of stain.
I let the glue dry for 24hrs before I removed the clamps
Almost done with the front.
I used Gorilla glue and a nail gun to secure the plywood in place, and clamps during the drying process.
Applying bendable plywood to the front and back.
You cant see the wheels when you are standing close to it. Low profile.
I used two heavy duty adjustable wheel systems.
Cutting the holes out for the bamboo to slide through. I set up the bamboo in the order that it will stand in the piece and trace the size of the hole that needed to be cut.
Adding wheels to make it easier to move.
Top and Bottom
1st cut, Bottom