Timber Frame chalet

3 Pins
 7y
Collection by
Timber Frame Rafter Tongue and Fork Joint - This joint is known as the tongue and fork joint. Here is an exploded view of two 4×6 rafters at 12/12 pitch with 1 1/2″ tenon set 1 1/2″ off the reference side with a 3/4″ oak peg. These rough sawn rafters have also been reduced down to the next smaller 1/2″ in size at the joint locations to insure a proper fit. - http://timberframehq.com/rafters-at-ridge-tongue-and-fork/ Design, Woodworking, Woodworking Projects, Woodworking Joinery, Wood Joinery, Timber Frame Joinery
Start A Fire
Timber Frame Rafter Tongue and Fork Joint - This joint is known as the tongue and fork joint. Here is an exploded view of two 4×6 rafters at 12/12 pitch with 1 1/2″ tenon set 1 1/2″ off the reference side with a 3/4″ oak peg. These rough sawn rafters have also been reduced down to the next smaller 1/2″ in size at the joint locations to insure a proper fit. - http://timberframehq.com/rafters-at-ridge-tongue-and-fork/
Exploded Rafter Seat Timber Frame Detail Kayu, Tak, Frame, Rafter, Case, Houten, House, Wood Construction, House Ideas
Home
Exploded Rafter Seat Timber Frame Detail