When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
 Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection - Trendha
Save
Product sold by
trendha.com
$479.99
In stock

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection

Product details
Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection
·
Age Range: Over 11 Years
·
Brand: Eachine
Precise details:
Description:
Brand: Eachine
Item No.:Eachine ET1
Item Name: Full Metal Hit & Miss Gas Engine
Color: Sliver
Material: Aluminium Alloy
Weight: About 2.2kg(Engine+Wooden Base)
Size Of Engine: 180*125*75mm(L*W*H)
Size Of Wooden Base: 180*66*50mm(L*W*H)
Cylinder Diameter: 22mm
Ltinerary: 20mm
Voltage: 3.5V
Fuel: ZIPPOOil or Gasoline
The best tappet clearance: 0.5mm
Weight: 1610g
Revolutions Per minute:1200rmp
Spare Parts:
For Rubber Ring
Engine Startup Steps:
1. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries.
2.Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there's no air in the oil pipe.
3.On the right side of the engine(installation of the flying hammer position), slowly turn conterclockwise by hand to buy more than one turn.Its role can make the mixed gasoline fully enter the cylinder.
4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position)
Precautions:
1.If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it's very likely that the carburetor needle should be adjusted.
2.Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio.
Note:
1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
2.Please allow little differs due to manual measurement.
3.Kids should be accompanied by adult.
4.Kids under 8 are not recommended to play.
5.Please be carful when you add the fuel.
6.An O-ring, which is not so airtight and can be started better
Package Included:
1 X Eachine Hit & Miss Gas Engine ( With Base )
Table view of description
The best tappet clearance
0
Item Name
Full Metal Hit
Size Of Engine
180*125*75mm
Weight
1610g
Ltinerary
20mm
Color
Sliver
Brand
Eachine
Material
Aluminium Alloy
Size Of Wooden Base
180*66*50mm
Cylinder Diameter
22mm
Age Range
Over 11 Years
Voltage
3
Fuel
ZIPPOOil or Gasoline
Revolutions Per minute
1200rmp
(n/a)
Ships from and sold by
trendha.com
Trendha_
Trendha
25k followers

More like this