Workshop organization

New 12 x 20 foot shop at the back of my 32 foot deep garage.
·
89 Pins
 5y
Collection by
Cross Cut Sled
Cross Cut Sled
Cross Cut Sled

Shop Jigs

34 Pins
two pictures of a table sawing machine with the same cutting tool on each side
Cross Cut Sled
Cross Cut Sled
a table sawing machine is being used to cut plywood planks into pieces
Cross Cut Sled
Cross Cut Sled
a table sawing machine is sitting on top of a workbench in a shop
Cross Cut Sled
Cross Cut Sled
a workbench with several pieces of wood on it
Cross Cut Sled
Cross Cut Sled
a table saw is sitting on top of a workbench
Upgraded fence with storage and a slide on taller extension
a table that has some tools on it
Baltic ply fence upgrade comes apart if needed...it's hollow inside
four pictures showing different types of tools used to make woodworking projects and their uses
Table Saw Multi Sled
Table Saw Multi Sled - Setting up the aluminum T track as runners for each sled.
four pictures showing the process of making a table sawtoothing board with different tools
Table Saw Multi Sled
Table Saw Multi Sled - squaring up is quick and easy after clamping on the sacrifice fence.
four different views of a table sawing machine
Table Saw Multi Sled
Table Saw Multi Sled - tapering back slats is fast and accurate after setting the sled to the template.
four different views of a table sawing machine
Table Saw Multi Sled
Table Saw Multi Sled - setting the 45 with a triangle square is bang on.
two pictures of a man working on a piece of wood
Table Saw Multi Sled
Table Saw Multi Sled - cross cutting large boards is easy as well as small stock cut to the same length with the fence from the bandsaw.
a man is working on some kind of workbench in a kitchen with white counter tops
Table Saw Multi Sled
Table Saw Multi Sled - cutting long boards on a 45 without a track saw.
a table sawing machine with tools on it
Adjustable Outfeed table
Table Saw upgrades....storage for my new outfeed table and fence. The miter guide is held on with 1" earth magnets glued to the saw legs.
four images show how to make a diy workbench with plywood boards
Adjustable Outfeed table
Adjustable Outfeed table...the perpendicular position slides across to allow alignment for long stock ripping and the taper sleds.